Variety of Fingerprint Reader product @ low cost

Model No.: ADI017

ADI017 is a fingerprint reader produced specifically for the Access Control. Its remarkable advantage is that it can match with most of the access controllers on the market ,inland or abroad. It supports Wiegand 26-64 output ,and integrates special access control software which can be upload, download, delete and wiegand products ,all input /output are using anti-jamming protection and over-voltage/circuit protection. The product experiences the strict degradation test before leaving factory ,high stability the main feature.
  • Support wiegand 26 or user-defined format, match most of door access controller
  • External connected with IC/ID reader.Card+ Fingerprint validation mode for currentreader
  • Adopt Biokey 2007 latest algorithm and intel32 bits processor
  • Option for built in Mifare reader or EM reader , it can deal with 3000 fingerprint templates , no matter good or poor quality, within only 1 second.
  • Adopt solid, durable, anti-static optical sensor
  • user-defined ID No, easy to manage
  • Standard RS485 connection, RS 232 or TCP/IP as auxiliary communication port
  • Support u are u sensor or F10 for collecting fingerprint template
  • Stability protection: reset switch, hardware watchdog, communication setting initialization by hardware, anti-over voltage and over current protection.
  • Dismantle alarm TTL output
  • Convenient DB15 connection
  • Applicable Wiegand manage software for fingerprint enrollment, download, upload, deletion

PRODUCT SHOWCASE

Enlarge Image
Wiegand input and output
:
Provide a standard wiegand26 or user-defined format to controller, accept the wiegand26 input, that is, a ID card reader could connect to it directly
Capacity of the templates
:
Standard version: 600 templates
The version With in-built ID module : 600/5000/8000 templates(three options)
The version with in-build Mifare module : Infinite Capacity
Verification mode
:
Standard version: 1:1 or 1:N, support only fingerprint
The version With in-built ID module : When 600 templates - 1:1 or 1:N, Support both fingerprint & card
The version With in-built ID module : When 5000/8000 templates - 1:1, Support card+ fingerprint
Communication ways
:
TCP/IP as backup : Default IP address-192.168.1.201
RS-485: Default baud rate-38400, device number-1, port-COM1
Sensor
:
Type: Optical; Resolution: 500DPI
Display
:
Indication: Power indicator, dual-color LED
Identification time
:
≤2S
FAR
:
≤0.0001%
FRR
:
≤1%
Dismantle alarm
:
TTL (transistor-transistor logic) output for alarm
Configuration
:
Intel32bit processor, 2007 version algorithm
Power
:
12V DC, Currency under idle status<50mA, wording currency<400mA
Operating Temperature
:
0°C~45°C
Operating Humidity
:
20%-80%
Size
:
130×58×62mm